AT&T 8400 Series Instructions For Installation Manual page 5

A Note on Bulk Administration and on LABELMASTER
Administering the 8403 Voice Terminal
Administering the 8410 and 8411 Voice Terminals
Administering Softkey Features on the 8410D and 8411D
The Default Softkey Features on the 8410D and 8411D
Alternate Softkey Features on the 8410D and 8411D
Button Numbering for 8410 and 8411 Voice Terminal Administration
Administering the 8434DX Voice Terminal
Administering Softkey Features on the 8434DX
The Default Softkey Features on the 8434DX
Alternate Softkey Features on the 8434DX
Button Numbering for 8434DX Voice Terminal Administration
The Test Feature and the Diagnostics Feature
The Test Feature (For ALL 8400-Series Voice Terminals)
The Diagnostics Feature (Used ONLY with the 8411 Voice Terminal)
Programming the Options
A Shortcut in Programming the Options (for Display Sets)
Enabling/Disabling the Speakerphone or Speaker
(or Changing to a Listen-Only Speaker)
Enabling/Disabling the Mute Function
Selecting Ringing Preference (for a Second Incoming Call)
Enabling/Disabling the Status Lights for the PassageWay
Connection (For the 8411 Voice Terminal Only)
Enabling/Disabling the Status Lights for the Analog (Tip/Ring)
Adjunct Interface (For the 8411 Voice Terminal Only)
Selecting Whether the I1-Channel or the I2-Channel
Will Be Used for the Analog Adjunct (For the 8411 Only)
Setting the Audio Volume Control (on the 8411)
Setting the Display for 1- or 2-Lines
(for the 8434DX only)
Viewing Information on Terminal Options and Parameters
Other 8400-Series Voice Terminals Documentation
iv
39
40
43
47
49
51
53
56
58
59
61
63
67
67
68
69
70
71
72
73
74
75
76
77
79
80
81