AT&T 8400 Series Instructions For Installation Manual page 27

Voice terminals
Hide thumbs Also See for 8400 Series:
Table of Contents

Advertisement

Installing Your Voice Terminal
a. Handset retainer
in place
c. Rotate handset
retainer 180 degrees.
Figure 6. Reversing the Handset Hook
4. Place the voice terminal face down on a flat surface.
5. Remove the desktop stand which is attached to the base of the voice
terminal by tabs on the top and bottom of the stand. See Figure 7.
22
180°
Press inward on the top of the stand until you can lift the top of the
stand out of the tab slot on the voice terminal.
Lift the bottom of the stand out of the lower tab slot.
b. Press to release
and then remove
handset retainer.
d. Replace handset
retainer.

Advertisement

Table of Contents
loading

This manual is also suitable for:

8403841084118434dx8410b8410d ... Show all

Table of Contents