Installing Your Voice Terminal
Line cord
routing channel
for wall mount
Line
jack
Figure 8. Line Cord Routing for Wall Mount
8. Snap one end of the coiled cord into the Handset jack (labeled
as shown in Figure 8. On the 8403, thread the cord into the channel
leading to the side edge of the voice terminal; the handset cord will then
lead off the side of the voice terminal.
9. Snap the free end of the 1-foot line cord into the wall jack.
10. Place the base of the voice terminal on the wall-jack mounting studs, and
pull downward until it is secure, as shown in Figure 9.
24
WARNING:
Do not insert the handset cord into the Adjunct jack. It may cause
equipment damage.
Handset
jack
Handset cord
routing channel
),