Table of Contents
Advertisement
Switch Administration
Dial the ''Refresh Terminal Parameters'' feature access code from the
terminal (or from another terminal that is already in service, specifying the
desired terminal to be programmed). The system indicates a successful
program operation by turning on the first three green call appearance
lights on the programmed set.
On new DEFINITY G3V3 (or later) systems, the terminals will automatically be
programmed with the administered transmission parameters shortly after system
initialization. The program status of a terminal can be determined by using the
''status station'' command and noting the contents of the ''download status'' field.
The ''busyout station'' and/or ''release station'' commands can be used to force
the administered transmission parameters (and softkey features for the 8410D,
8411D, and 8434DX) to be sent to the terminal immediately.
A terminal that has not been programmed with the proper parameters may
experience incorrect volume levels while on a call, incorrect Touch Tone levels
while placing a call, or incorrect softkey labels. If incorrect parameters are
suspected, use the ''busyout station'' and/or ''release station'' commands to force
the currently administered parameters to be sent to the terminal. The ''status
station'' command should then be used to verify that the ''download status'' field
indicates the parameters were successfully downloaded.
All 8400-Series terminals are checked each day by the switch (during scheduled
maintenance) to ensure they are operating with the currently-administered
transmission parameters. If the switch detects an incorrectly-programmed
terminal, it will automatically send the correct parameters to the terminal. Note
that softkey labels are not checked by the switch and will not be automatically
corrected. Use the ''busyout station'' and/or ''release station'' commands to
manually correct the softkey labels on a particular terminal.
38
Advertisement
Table of Contents
