Pro-Form SPORT 5.5 User Manual page 23

HOW TO CONNECT A HEART RATE MONITOR TO
THE CONSOLE
The console is compatible with all Bluetooth® Smart
heart rate monitors. For information about purchas-
ing an optional heart rate monitor, see page 25.
To connect your Bluetooth Smart heart rate monitor to
the console, press the iFIT Sync button on the console;
the console pairing number will appear in the display.
When a connection is established, the LED on the
console will flash red twice.
Note: If there is more than one compatible heart rate
monitor near the console, the console will connect to
the heart rate monitor with the strongest signal.
To disconnect your heart rate monitor from the console,
press and hold the iFIT Sync button on the console
until the LED on the console turns solid green.
Note: All Bluetooth connections between the console
and other devices (including any tablets, heart rate
monitors, and so forth) will be disconnected.
THE SETTINGS MODE
1. Select the settings mode.
To select the settings mode, press
the gear button (K). The first settings
screen will appear in the display.
Note: If you have selected a workout,
you may need to press the Stop but-
ton repeatedly to return to the home
screen before selecting the settings
mode.
2. Navigate the settings mode.
While the settings mode is selected, you can
navigate through several settings screens. Press
the Stop button repeatedly to select the desired
settings screen.
3. Change settings as desired.
Software Version Number—The software version
number will appear in the display.
Incline System Calibration—The letters CAL will
appear in the display. If the incline system is not
functioning properly, it may need to be calibrated.
To calibrate the incline system, press the Incline
increase or decrease button. The treadmill will
automatically rise to the maximum incline level and
then return to the minimum level. When the tread-
mill stops moving, the incline system is calibrated.
Unit of Measurement—The currently selected unit
of measurement will appear in the display. The
console can show speed and distance in standard
or metric units of measurement. To change the unit
of measurement, press the Speed increase button
repeatedly. To view workout information in standard
units, select Std. To view workout information in
metric units, select Met.
23
K