Figure 6.1: Power Setting Menu For Dlt-V6210Fl - Advantech-DLoG DLT-V6210FL Manual

Power Setting
Note:
This settings
are not
available
with
WEC7 OS.
DLT-V6210FL Power Setting Menu

Figure 6.1: Power setting menu for DLT-V6210FL

Advantech Co., Ltd.
Battery To configure the percentage threshold of battery for
Capacity switch-on/off event.
Threshold
Thermal NOTE: FACTORY SETTING. Not customer
Protection configurable.
Thermal protection per default is "ON" on ALL
terminals.
For your information:
Bootup: Defines the values the terminal can boot at
ambient temperatures in off state.
Shut down: Defines the values the terminal releases an
emergency shutdown, based on inside temperature.
Sensor NOTE: FACTORY SETTING. Not customer
Temperature configurable.
Threshold
For your information: The temperature threshold of each
sensor for switch-on/off event is defined.
MDevice Manual www.advantech.com 11 / 23