freightliner M2 Plus 2023 Manual page 31

04/29/2019
Fig. 3.17, Quick Access Screen: Cruise Control
Transmission allows the driver to turn the creep
mode or eCoast feature on or off. See
"Instruments and Systems: ICUC" in this chapter for
more information.
Engine Idle Adjust allows the driver to adjust or
deactivate the engine idle. It is not available when
the vehicle is in motion. See
information see "Instruments and Systems: ICUC" in
this chapter.
Power Take Off allows the driver to customize the
amount of power being transferred. See
The Optimized Idle screens allow the driver to
choose the optimized idle mode and enable or
disable the feature. For more information see
"Instruments and Systems: ICUC" in this chapter
Software Updates
A software update consists of three steps:
1. Downloading the software.
2. Installing the software.
3. Activating the software by restarting the system.
A popup message will appear when an update is
available. In addition, the software update option in
the diagnostics menu will be active.
f611638
Fig. 3.18. See
Fig. 3.19. For more
Fig. 3.20.
04/29/2019
Fig. 3.18, Quick Access Screen: Transmission
04/29/2019
Fig. 3.19, Quick Access Screen: Engine Idle Adjust
The vehicle must be in neutral gear, the parking
brake set, and the engine off before a software
Instruments
f611639
f611640
3.10