freightliner M2 Plus 2023 Manual page 257

05/16/2017
1. Filter Collar
2. Filter Vent
3. Filter Vent Seal
4. Filter Cover
02/16/2009
Fig. 23.3, DAVCO Collar Wrench
is used for removal. During installation, the vent
1
2
3
4
5
6
7
5. Filter Cover Seal
6. Spring
7. Filter Element
8. Threaded Stud
Fig. 23.2, Davco Model 382 Fuel/Water Separator
FOR REMOVAL OF TOP COLLAR ONLY
f470277
In an Emergency
8
9
9. Fuel Port
10. Drain
11. Bottom Plate Collar
cap is to be hand-tightened only, not tightened
with a wrench.
4.
Remove the filter cover, filter cover seal and
spring. Retain them for later assembly.
5. Remove the filter element and dispose of it
properly.
NOTE: Remove the rubber grommet from the
stud.
6. Install the standard engine spin-on filter (included
in the emergency kit) on the threaded stud.
7. Install the filter cover, filter cover seal, and
spring, as removed.
10
11
f470417
23.2