freightliner M2 Plus 2023 Manual page 26

Instruments
04/25/2019
The main ICUC driver display screens include the
splash screen that displays during vehicle start-up
and the cruise control settings screen.
The six ICUC top-level menu categories are:
•
Home/Basic Information
•
Drive Time Systems
•
Vehicle Operations
•
Maintenance
•
Infotainment
•
User Settings
Home/Basic Information Screens
There are three screens under Home/Basic
Information:
•
Home
•
Trip
•
Leg
The 'Home' screen displays a fuel consumption bar
graph, the current outside temperature, the vehicle
charging system voltage, the compass direction of
travel, and the current odometer value.
3.5
Fig. 3.7, ICUC Alarm Clock Screens
The 'Trip' report screen, shown in
calculations based on the engine run time such as
overall milage of trip, trip mpg, average mph, and trip
time. The 'Leg' report screen does the same for the
current leg of the trip. To reset either screen, press
and hold the 'OK' switch on the switch pod when on
the screen.
Drive Time Systems Screens
There are four screen under Drive Time Systems:
The 'Speed' screen, shown in
current vehicle speed and PasSmart information.
Depending on equipment installed, the 'Driving
Assistance' screen, shown in
cruise control information, lane departure information,
side guard assist information, and display's the
current traffic signs.
Depending on systems installed, video is recorded
when active safety systems are engaged or unsafe
driving conditions are detected.
•
Speed
•
Driving Assistance
•
Video
f611636
Fig. 3.9, displays
Fig. 3.8, displays the
Fig. 3.10, displays