Steps
1. Connect the fan cable to the system board.
2. Align the screw holes on the fan with the screw holes on the system board and palm-rest and keyboard assembly.
3. Replace the two screws (M2x4) and the single screw (M1.6x4) to secure the fan to the system board and palm-rest and
keyboard assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Removing the left fan
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the left fan and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
23