Table of Contents
Advertisement
Steps
1. Align and place the right fan on the palm-rest and keyboard assembly.
2. Replace the two (M2x6) screws to secure the right fan to the palm-rest and keyboard assembly.
3. Connect the left-fan cable to the system board.
4. Route the wireless-card cable through the routing guides on the fan.
5. Adhere the tapes that secures the wireless-card cable to the system board.
Next steps
1. Install the
rear cover
2. Install the
base
cover.
3. Follow the procedure in
Removing the left fan
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
rear
cover.
About this task
The following image indicates the location of the left fan and provides a visual representation of the removal procedure. The
orientation is based on the position of the fan when you are working on your computer.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
41
Advertisement
Table of Contents
