7. Install the
solid-state
8. Install the
memory
module.
9. Install the battery.
10. Install the
base
cover.
11. Follow the procedure in
Palm-rest and keyboard assembly
Palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
memory
module.
5. Remove the
solid-state
6. Remove the
heat
sink.
7. Remove the
right
fan.
8. Remove the
left
fan.
9. Remove the
audio-daughter
10. Remove the
display
assembly.
11. Remove the
system
board.
12. Remove the antennas.
About this task
The following image indicates the palm-rest and keyboard assembly and provides a visual representation of the removal
procedure.
After performing the steps in the pre-requisites, you are left with the palm-rest and keyboard assembly.
drive.
After working inside your
Before working inside your
drive.
board.
computer.
computer.
Removing and installing components
43