Fan; Removing The Left Fan - Dell P117F003 Service Manual

Steps
1. Place the power-adapter port into the slot on the palm-rest and keyboard assembly.
2. Adhere the tapes that secure the power-adapter port cable to the system board.
3. Connect the power-adapter port cable to the system board.
4. Adhere the tape that secures the power-adapter port cable to the system board.
5. Route the display cable through the routing guides on the palm-rest and keyboard assembly.
6. Connect the display cable to the system board and close the latch.
7. Adhere the tape that secures the display-cable connector latch to the system board.
8. Close the right display hinge and align the screw holes on the right display hinge with the screw holes on the system board.
9. Replace the two screws (M2.5x5) that secure the right display hinge to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Fan

Removing the left fan

Prerequisites
1. Follow the procedure in
NOTE: Ensure that your computer is in Service Mode. For more information see, step 6 in
computer.
2. Remove the base cover.
About this task
The following image(s) indicate the location of the left fan and provides a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Before working inside your
Removing and installing components 31