Steps
1. Align the screw hole on each solid state drive thermal bracket with the respective screw hole on the palm rest and keyboard
assembly.
2. Replace the seven screws (M2x4) to secure the battery to the palm rest and keyboard assembly.
3. Connect the battery cable to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Memory module
Removing the memory module
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the memory modules and provides a visual representation of the removal
procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
17