Table of Contents
Advertisement
Steps
1. Remove the two screws (M2x4) and the single screw (M1.6x4) that secure the fan to the system board and palm-rest and
keyboard assembly.
CAUTION:
Do not hold the fan assembly at the center, as it may damage the center bearing.
2. Disconnect the fan cable from the system board.
3. Lift the fan off the palm-rest and keyboard assembly.
Installing the right fan
Prerequisites
About this task
The following images indicate the location of the right fan and provides a visual representation of the installation procedure.
22
Removing and installing components
Advertisement
Table of Contents
