Table of Contents
Advertisement
Table 9. System setup options—Connection menu (continued)
Connection
HTTP(s) Boot
HTTP(s) Boot Modes
Table 10. System setup options—Power menu
Power
Battery Configuration
Advanced Configuration
Enable Advanced Battery Charge
Configuration
Peak Shift
Thermal Management
USB Wake Support
Wake on Dell USB-C Dock
Block Sleep
Lid Switch
Enable Lid Switch
Power On Lid Open
Intel Speed Shift Technology
52
System setup
Enable or disable HTTP(s) boot capabilities.
Deafult: ON
Select the mode to automatically extract Boot URL from the Dynamic Host
Configuration Protocol (DHCP) or manually read Boot URL as provided by the
user.
By default, Auto Mode is selected.
Enables the computer to run on battery during power usage hours. Use the
below options to prevent AC power usage between certain times of each day.
By default Adaptive is selected.
Enables Advanced Battery Charge Configuration from the beginning of the
day to a specified work period. Advanced Battery Charged maximizes battery
health while still supporting heavy use during the work day.
Default: OFF
Enables the computer to run on battery during peak power usage hours.
Default: OFF
Sets cooling fan and processor heat management to adjust system
performance, noise, and temperature.
By default, Optimized is selected.
Enables connecting a Dell USB-C Dock to wake the computer from Standby.
Default: ON
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE:
If enabled, the computer will not go to sleep, Intel Rapid Start will
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Enables or disables the lid switch.
Default: ON
Enables the computer to power up from the off state whenever the lid is
opened.
Default: ON
Enables or disables the Intel Speed Shift Technology support. Setting this
option to enable allows the operating system to select the appropriate
processor performance automatically.
Default: ON
Advertisement
Table of Contents
