Steps
1. Align the screw hole on the audio-daughter board with the screw hole on the palm-rest and keyboard assembly.
2. Replace the three screws (M2x4) that secure the audio-daughter board to the palm-rest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
29