IBM BladeCenter Management Module Installation Manual page 37

v Novell NetWare 6.5
The management-module Web interface does not support the double-byte
character set (DBCS) languages.
The management-module Web interface and management-module
command-line interface can be used to perform tasks such as:
v Defining the login IDs and passwords
v Selecting recipients for alert notification of specific events
v Monitoring the status of BladeCenter components
v Controlling BladeCenter components, including the blade servers
v Accessing the I/O modules to configure them
v Changing the drive startup sequence for a blade server
v Setting the date and time
v Using a remote console for the blade servers
v Changing ownership of the keyboard, video, and mouse
v Changing ownership of the optical drive, diskette drive (some BladeCenter
unit types), and USB port
v Activating On Demand blade servers
Note: The IBM Director program is a system-management product that comes
with the BladeCenter unit. To configure the remote alert recipients for
IBM Director over LAN, the remote alert recipient must be an IBM
Director-enabled server.
You also can use the management-module Web interface and
management-module command-line interface to view some of the blade server
configuration settings. See "Using the management and configuration
program" on page 29 and the IBM Eserver BladeCenter Management-Module
Command-Line Interface Reference Guide for more information.
Chapter 4. Configuring the management module
25