Advantech MIX-Q670A1 Manual page 30

7. Serial ATA 6.0Gb/s ports (7-pin SATA6G_0~1)
These ports connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA
6.0 Gb/s signal cables.
IMPORTANT: When using hot-plug and NCQ, set the SATA VMD controller
item in the BIOS to [Disabled]. See section 3.3.4 SATA Configuration for
details.
8.
Front Panel Audio header (10-1 pin AAFP)
This header is for a chassis-mounted front panel audio I/O module that
supports HD audio standard. Connect one end of the front panel audio I/O
module cable to this header.
IMPORTANT: We recommend that you connect a high-definition front panel
audio module to this header to avail of the motherboard's high-definition audio
capability.
2-22
SATA6G_0
A
SATA6G_1
B
GND
RSATA_TXP
A
RSATA_TXN
GND
B
RSATA_RXN
RSATA_RXP
GND
AAFP
PIN 10
A_JD_LINE2
A_JD_MIC2
(NC)
A_GND
PIN 2
PIN 9
A_LINE2_L
A_JD_FRONT
A_LINE2_R
A_MIC2_R
A_MIC2_L
PIN 1
MIX-Q670A1