Table of Contents
Advertisement
5.
After unlocking the screens users can now select
6.
After selecting
7.
From this window the
Note:
It is not required to change the
match the
Field Controller
MSTP Baud Rate is the
devices must be configured for the same baud rate for communications on the subnet.
Device ID is the
BACnet
BACnet instance number to ensure proper communications. This BACnet instance number should be unique
even across subnets. See
Device Name is the user assigned name for the controller. This is not necessary for
however, it is useful to name each controller for organizational purposes.
APDU Timeout seconds Leave this at the default setting of
MSTP Station is the MS/TP device address. This is the unique address users must give each controller on the
subnet (fieldbus).
MSTP Max Masters is the maximum address that this controller will poll when in the "poll for masters" state.
Because this is a
BACnet Master
pass the token to. To optimize the speed of the network, it is recommended that the last master device on
the subnet be set at the maximum
subnet (fieldbus) is the
will speed up communications as it will not go into the "poll for masters" state and immediately pass the
token back to the device at
BACnet Manual (MAN0106)
See the
optimizing the
BACnet
©ABB 2022 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
the following
Controller Setup
BACnet MS/TP
configuration settings can now be configured.
or
Site Number
Comms Controller
address with the MSTP Station address (see below).
Baud
rate at which all the other devices on the subnet (fieldbus) are communicating. All
device instance number. Every BACnet controller within the site must receive a unique
BACnet Manual (MAN0106)
device it will go into this state to search for the next
MS/TP
address on the network. For example, if the last device on the
CBV-2U4-3T(-N)
at address
MS/TP
address
.
0
for more details regarding this functionality and for other tips on
network.
Installation Overview
CBV-2U4-3T(-N) |
.
Controller Setup
dialog will open:
BACnet Controller Setup
preset values. It is however recommended to
for further information.
seconds.
3
, then users would set the MSTP Max Masters to
63
BACnet
communications;
BACnet Master
device to
. This
63
20
Advertisement
Table of Contents
