Advertisement
March 2023
5
Verify Operation
Operation can be verified in four locations: by using the Field
Communicator, at the Gateway via the Emerson Wireless Gateway's
integrated web server, via AMS Wireless Configurator, or with the wireless
device's LCD display.
5.1
Field Communicator
If you are able to communicate to the wireless device via a Field
Communicator, the power module is powering the device and working
correctly.
wireless device.
Figure 5-1: Field Communicator Connections
5.2
Emerson Wireless Gateway
If the wireless device was configured with the Network ID and Join Key and
sufficient time has passed for network polling, the transmitter will be
connected to the network. To verify device operation and connection to the
network with the Smart Wireless Gateway's integrated web server, open the
Smart Wireless Gateway's integral web interface, and navigate to the
Explorer page. If the wireless device has joined the network, the Power
Module is functioning properly.
Notice
It may take several minutes for the device to join the network.
5.3
AMS Wireless Configurator
When the device has joined the network, it will appear in the Wireless
Configurator as illustrated below in
Quick Start Guide
Figure 5-1
shows how to connect a Field Communicator to a
Figure
5-2.
Quick Start Guide
9
Advertisement
