ETC sensor+ CEM+ Manual page 50

Fluorescent
Change the firing mode to Fluorescent and click Save Changes. After saving changes, the remaining
dimmer properties will change automatically or can now be set to your desired values.
Always On
Change the firing mode to Always On and click Save Changes. After saving changes, the remaining
dimmer properties will change automatically or can now be set to your desired values.
44
Property
Firing Mode
Curve
Threshold
Min. Scale Voltage
Max. Scale Voltage
Voltage Regulation
Preheat
Dynamic Preheat
DC Output Prevent
InRush Protect
Property
Firing Mode
Curve
Threshold
Min. Scale Voltage
Max. Scale Voltage
Voltage Regulation
Preheat
Dynamic Preheat
DC Output Prevent
InRush Protect
120V
Fluorescent
Linear
1%
or desired setting or desired setting
56V
or desired setting or desired setting
120V
or desired setting or desired setting
Checked
Unchecked
0 sec.
Checked
Unchecked
120V
Always On
Mod-Square
0%
140V
140V
Unchecked
Unchecked
0 sec.
Unchecked
Unchecked
230V
Fluorescent
Linear
1%
56V
240V
Checked
Unchecked
0 sec.
Checked
Unchecked
230V
Always On
Mod-Square
0%
280V
280V
Unchecked
Unchecked
0 sec.
Unchecked
Unchecked
Sensor+ CEM+ User/Config Manual