Configuring & Managing Accessories
Changing the Sensor Configuration between Normally Open & Normally Closed
To change the Lighting signal between Normally Open or Normally closed:
Turn thermostat ON;
➤
Press & hold the CONFIG button for 5 seconds, the screen will show 0011;
➤
Press CONFIG button, the screen will show CCC;
➤
Press the F/C button three (3) times;
➤
Press the UP / DOWN button to set the setting to 1;
➤
Press the FAN button to switch the control value to the O / C.;
➤
Press Up / Down button to set the value to O/C;
➤
➤ O – Energized when room is empty
➤ C – Energized when room is Occupied
Press the OFF button to save the settings.
➤
Press the RESET button on the front of thermostat.
➤
49