Occupancy Sensor Installation (Optional); Mounting An Occupancy Sensor - Emerson VERDANT VX Series Installation Manual

Occupancy Sensor Installation
Mounting the Occupancy Sensor (Optional)
Select the appropriate installation location for the external occupancy sensor,
➤
taking into account the following;
THE OCCUPANCY SENSOR SHOULD FACE THE DESIRED OCCUPANCY
DETECTION AREA.
With the faceplate removed, place the sensor on the wall in the installation
➤
location and mark location for drilling holes for the two (2) mounting screws;
Drill two (2) 3/16" holes in the wall and insert the two (2) supplied wall
➤
anchors;
Use the two (2) supplied screws to securely mount the sensor to the wall;
➤
Insert (2) AA batteries into the compartment (not supplied - wireless sensors
➤
only)
12