Pairing The Thermostat With A Network Programmer - Emerson VERDANT VX Series Installation Manual

Troubleshooting
Pairing the thermostat
In the case of a networked installation with online management, the thermostat
must be paired with a Network Programmer specific to the property before the
installation.
The thermostat must not be powered during the pairing procedure.
Plug the HDMI cable into the mini HDMI port on the thermostat;
➤
Press the black button on the programmer. The red light on the programmer
➤
should turn on and remain steadily lit;
If the red light on the programmer is blinking or is not steadily lit, unplug the
➤
programmer from the thermostat and repeat the steps above.
Unplug the programmer from the thermostat.
➤
51