Thermostat Configuration
Testing the Thermostat
Following the thermostat configuration, test if the thermostat is controlling the HVAC
unit.
Ensure the thermostat is powered and the faceplate is on.
➤
Press the DOWN button to change the temperature set point below the
➤
current room temperature to confirm that the thermostat initiates air
conditioning;
Press the UP button to change the temperature set point above the current
➤
room temperature to confirm that the thermostat initiates heating;
Change the fan speed by touching the FAN button to test if the thermostat is
➤
controlling the fan speed.
21