Footplate On A Manual Leg Rest - Permobil M1 User Manual

4.11.7 Footplate on a manual leg rest

You can adjust the angle and the height of a footplate on a manual leg rest.
This is how you adjust the angle of the footplate.
Spanner 10 mm
Allen key 5 mm
1. Tilt up the footplate.
2. Loosen the lock nut .
3. Adjust the stop screw
angle.
4. Tighten lock nut to lock the stop screw in the preferred position.
This is how you adjust the height of the footplates. You can adjust the height
of each footplate individually.
Torque wrench
Allen key 5 mm
1. Loosen the two screws
2. Adjust the footplate bracket to the preferred height.
3. Torque the two screws
4. Make sure that the footplate is secured.
in or out until the footplate has the preferred
.
to 9.8 N m (7.2 lb. ft.).
Wheelchair usage - 51