Footplate On A Manual Leg Rest - Permobil M1 User Manual

4.10.7 Footplate on a manual leg rest

You can adjust the angle and the height of a footplate on a manual leg rest.
This is how you adjust the angle of the footplate.
Wrench 10 mm
Allen key 5 mm
1. Tilt up the footplate.
2. Loosen lock nut .
3. Adjust stop screw in or out until the footplate has the preferred angle.
4. Tighten lock nut to lock the stop screw in the preferred position.
This is how you adjust the height of the footplates. You can adjust the height
of each footplate individually.
Torque wrench
Allen key 5 mm
1. Loosen the two screws
2. Adjust the footplate bracket to the preferred height.
3. Torque the two screws
4. Make sure that the footplate is secured.
50 - Wheelchair usage
.
to 9.8 N m (7.2 lb. ft.).