Main Specifications; Prior To Assembly; Installation Steps - TMG -GH2030BL Product Manual

2030walk-in tunnel greenhouse

Main Specifications :

- Assembly size : W6 x L9 x H3 (m) / W20 x L30 x H10 (ft)

- Shoulder wall clearance height : 1.25 m / 4.1ft

Front roll up door : W1.1 x H2 (m) / W3.6 x H6.6 (ft)

Please read the instructions carefully before installation. It is important to follow your

local safety regulations and industry standards during installation. Regulations may include

but are not limited to :

- Safety helmets, protective eyewear, and clothing

- Safety harnesses for all elevated workers

- Proper ladder, cage, and safety operation

Check all components and parts before installation. All parts are marked with a part

number, please refer to the parts list to make sure you have all parts.

Choose a day with low or no wind to install, assembly is hard in heavy wind. Do not make

any alterations to the structure. Do not hang any weights on the frame during installation,

including parts. We are not responsible for any damages or injuries caused by

inappropriate installation, unauthorized modifications or extreme weather.

This building is not intended for human occupancy.

It is recommended to tape or add foam/rubber on the frame where joints connect and

where it touches the cover. This will help extend the life span of the cover.

Read the following item list carefully and count the number of items to ensure that all parts

are included prior to setup.

Step 1 : Review the whole structure and choose the proper installation site

Choose a solid flat level ground area to set up the building. Do not install the building on

soft ground, wetland, uneven surfaces, sloped surfaces, or on top of structures that are not

rated to hold its weight.

We strongly recommend that you build the structure on a solid foundation such as cement

and use anchor bolts on all baseplates.

Be aware of the surrounding area. Do not set up the building near snowdrifts, open

flames or exposed electrical wires. Do not keep heat sources near the fabric cover.

Keep the building surroundings clear at all times.

Page 1 of