Step 9 : Install rear cover panel
Use rope (#24) to lift up the rear cover (#23A) from the center grommet and tie it
firmly to the truss tube and spread toward both sides through each grommet along the
tube (refer to Figure 14).
Step 10 : Install the top cover (#22)
Do not install the cover during windy weather!
Unpack the top cover and place it along one of the long sides of the structure.
Use 3 to 5 ropes (#24) to pull the cover over the top of the structure, 2 or 3
people standing inside on ladders to push upwards will help to move the cover
smooth without any damage (refer to Figure 15).
Figure 14
Figure 15
16
Page 15 of