Epson BrightLink 455Wi User Manual page 143

The message
Not Supported
■ Make sure the correct input signal is selected in the Signal menu
(see page 87).
Make sure your computer's resolution and frequency or refresh
■
rate is supported by the projector (see page 160). If necessary,
change your computer's settings.
The projector and notebook don't display the same image
If you're projecting from a notebook, and you can't see your image on
the projection screen and on your computer at the same time, follow
these guidelines.
If you're using a PC notebook:
On most systems, there's a function key that lets you toggle
■
between the LCD screen and the projector, or display on both at
the same time. It may be labeled
. You may have to hold down the
Allow a few seconds for the projector to sync up after changing
the setting.
■ If the function key doesn't permit you to display simultaneously
on both screens, you should check your monitor settings to make
sure both the LCD screen and the external monitor port are
enabled.
From the Control Panel, open the
option, then select the
Settings
Vista, right-click on the desktop, select
, then select
Display Settings
for adjusting the settings varies by brand; you may need to click a
tab, then make sure the external Monitor port is set as
Monitor
your primary display and/or enabled. See your computer's
documentation or online help for details.
is displayed.
or have an icon such as
CRT/LCD
key while pressing it.
Fn
utility, select the
Display
option (in Windows
Advanced
Personalize
Advanced Settings
, select
). The method
Solving Problems
143