Replacing The Lamp - Epson BrightLink 455Wi User Manual

4. Press in the new air filter until it clicks into place.

Replacing the Lamp

The life span of the projection lamp is about 2500 hours if
in the Settings menu is
Consumption
hours if this setting is
ECO
It is time to replace the lamp when:
■ The projected image gets darker or starts to deteriorate.
The message
■
Replace the lamp
light flashes orange. To maintain projector brightness
Lamp
and image quality, replace the lamp as soon as possible.
You may also need to replace the lamp if the
red. See page 137.
Contact your dealer or call Epson as described in "Where To Get
Help" on page 155. Request part number V13H010L57.
(default), and 3500
Normal
. See page 131 to check the lamp usage.
appears on the screen and the
Lamp
note
Turn off this product when
Power
not in use to prolong the life
of the projector.
light flashes
Maintaining the Projector
127