Epson BrightLink 455Wi User Manual page 112

note
Text input for WEP
encryption varies with
different access points; check
with your network
administrator. Try ASCII
first. If that doesn't work,
try Text2 and then Text3.
Using the Projector on a Network
112
5. For the WEP encryption setting, select
. Press to return to the previous menu.
Enter Esc
6. For Format, highlight
enable hexadecimal input, then press
the previous menu.
7. If you chose
64Bit
, , , or . Press
1 2 3 4
Highlight the
Encryption key
you selected, then press
individual letters; then press
navigate backward and forward through the input text, highlight
the arrows and press
letters, highlight the option and press
highlight and press
Finish
8. Check with your network administrator for directions on entering
a key for your network, and follow these general guidelines:
■ For 128 bit WEP encryption with hexadecimal input, enter
26 characters, from 0 to 9 and from A to F.
■ For 64 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
■ For 128 bit WEP encryption with ASCII or text input, enter
13 alphanumeric characters.
■ For 64 bit WEP encryption with ASCII or text input, enter 5
alphanumeric characters.
9. For Authentication Type, select
the setting your network uses. Press
menu.
128Bit
to enable text input or
ASCII
Enter
as WEP Encryption, choose
to return to the previous menu.
Esc
that corresponds to the Key ID
. Use the arrow buttons to select
Enter
to input a character. To
Enter
. To toggle symbol settings or capital
Enter
Enter
.
Enter
or
Open
to return to the previous
Esc
or and press
64Bit
to
HEX
. Press to return to
Esc
Encryption key
. When you're done,
, depending on
Shared