Epson BrightLink 455Wi User Manual page 141

If the power was switched off and then on again, the projector
■
may be cooling down. Wait until the Ppower light stops flashing
and remains orange; then press the Ppower button again.
■ The attached computer may be in sleep mode or displaying a
black screen saver. Try pressing a key on the computer.
■ If you are projecting from a DVD player or other video source,
make sure you turn it on and press its
■ If you are projecting video from a laptop, you may need to set the
laptop to external output only.
If you are projecting from a composite or S-Video video source,
■
make sure the Video Signal setting is correct (see page 87).
You can also try resetting all of the menu settings (see page 85).
■
■ If you're projecting through your computer's USB port, make
sure the
USB Type B
(see page 92).
Display
With Windows, you may need to install the USB display drivers
manually by clicking
>
EPSON_PJ_UD
the USB display drivers are installed, click
>
Programs EPSON Projector
EPSON USB Display Vx.x
With Mac OS X, click the
there is no USB Display icon in the Dock, open the
folder in the Applications folder and run
If you see a black screen and you are connected through your
■
computer's USB port (or through your network), the application
may be using DirectX drawing features, which are not supported.
Play
setting in the Extended menu is set to
or
My Computer Computer
. If nothing is projected after
EMP_UDSE.EXE
>
EPSON USB Display
on your computer.
icon in the Dock. If
USB Display
USB Display
button.
USB
>
or
All Programs
>
USB Display
.
Solving Problems
141