Table of Contents
Advertisement
8 of 24
3 Transport/Storage/Disposal
3 Transport/Storage/Disposal
3.1 Checking the condition upon delivery
1. On transfer of goods, check each packaging unit for damage.
2. In the event of in-transit damage, assess the exact damage, document it and
notify KSB or the supplying dealer and the insurer about the damage in writing
immediately.
3.2 Transport
CAUTION
Improper transport
Damage to the device!
▷ Always transport the device properly and in its original packaging.
▷ For transport, observe the transport instructions on the original packaging.
▷ Do not throw the device.
1. Upon receipt, unpack the device and check for in-transit damage.
2. Report any in-transit damage to the manufacturer immediately.
3. Dispose of packaging material in accordance with local regulations.
3.3 Storage
CAUTION
Damage during storage due to humidity, dirt or vermin
Corrosion/contamination of the control unit!
▷ For outdoor storage cover the (packed or unpacked) control unit and
accessories with water-proof material.
If the ambient conditions for storage are met, the function of the control unit is
safeguarded even after a prolonged period of storage. If properly stored indoors, the
equipment is protected for a maximum of 12 months.
▪ Store the control unit in dry, vibration-free conditions and, if possible, in its
original packaging.
▪ Store the control unit in a dry room at constant atmospheric humidity.
▪ Prevent excessive fluctuations in atmospheric humidity.
Table 4: Ambient conditions for storage
Ambient condition
Relative humidity
Ambient temperature
MSE/MSD
Value
Max. 85 % (no condensation)
-10 °C to + 70 °C
Advertisement
Table of Contents
