Advertisement
Type the switch's default management IP address http://<gwn780x(P)> in the browser, and enter username and password to
login. (The default administrator username is "admin" and the default random password can be found at the sticker on the
GWN7800 switch).
On the second page (Access Control), the user can specify the Web Idle Timeout before the web page auto lock, and also
enabling Telnet or SSH.
User Management
There are three levels of users, namely administrator, operator and monitor. The administrator authenticates and authorizes
users who log in to the switch according to management need where each user has different permissions and passwords.
1. Administrator
Each device has one and only one administrator.
The highest privileges, can execute any command.
The username admin cannot be changed, only the password can be changed.
Support adding, deleting operator and monitor.
2. Operator
Added by administrator, there can be multiple accounts as Operators.
The second highest authority, can execute all commands except the administrator's key operations and important
mandatory commands
Can't change the username, only password.
Support adding, deleting Monitor users.
Note:
All features of admin are allowed except setting management IP address and factory reset.
3. Monitor
Multiple Monitors are possible with the permission of an Administrator or Operator.
The lowest authority, can only view switch status and statistics without any execution and configuration authority.
Can't change the username, only password.
Note:
Can only view information.
Click on "Add" button to add new user then specify the password the user level (Operator or Monitor).
Login Service
Advertisement
