Advertisement
MLD Version
Report Suppression
Once Global MLD Snooping is enabled, then the user can enable more settings per VLAN.
VLAN
MLD Snooping
MLD Snooping Querier
MLD Snooping Querier Version
Router Port Auto-Learning
Port Fast Leave
Query Robustness
Query Interval (s)
Query Max Response Interval (s)
Last Member Query Count
Last Member Query Interval (s)
● IP-Based: Forward using IP address
Select the MLD Version.
Enable or disable the switch to handle MLD reports
between router and host, suppressing bandwidth used by
MLD.
MLD Snooping Global Settings
MLD Snooping – Edit VLAN
Displays the selected VLAN
Click on the toggle button to enable MLD Snooping for the selected VLAN.
Click the toggle button to enable the MLD Snooping Querier.
Select from the drop-down list the MLD Snooping Querier Version.
Click on the toggle button to learn router port by MLD query.
Select Enable/Disable Fast Leave feature for the desired port.
Note: If Fast Leave is enabled for a port, the switch will immediately remove this port from the
multicast group upon receiving MLD leave messages.
Set a number which allows tuning for the expected packet loss on a subnet.
The valid range is 1-7
Set the interval of querier send general query.
It specifies the maximum allowed time before sending a responding report.
Note: The valid range is 5-20 in seconds.
After quering for specified times and still not receiving any response from the subscribed
member, GWN7800 series switches will stop transmitting data to the related GE port(s).
Note: The valid range is 1-7
Set The maximum time interval between counting each member query message with no
responses from any subscribed member.
Note: The valid range is 1-25 in seconds
MLD Snooping – Edit VLAN
Advertisement
