Advertisement
Quick Links
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : +1 (617) 566 - 9300
Fax: +1 (617) 249 - 1987
www.grandstream.com
GWN7800 Series
Entreprise Layer 2+
Managed Network Switch
For Certification, Warranty and RMA information, please visit
www.grandstream.com
Quick Installation Guide
Advertisement
Related Manuals for Grandstream Networks GWN7800 Series
Summary of Contents for Grandstream Networks GWN7800 Series
- Page 1 Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com GWN7800 Series Entreprise Layer 2+ Managed Network Switch For Certification, Warranty and RMA information, please visit www.grandstream.com...
- Page 2 The PoE models provide smart dynamic PoE output to power IP phones, IP cameras, Wi-Fi access points and other PoE endpoints. The GWN7800 series can be managed in a number of ways, including the local network controller embedded in the GWN7800 series switch, any GWN7000 series router with integrated local master, Grandstream’s...
- Page 3 GWN7803/GWN7803P GWN7802/GWN7802P GWN7803 GWN7802 GWN7803P GWN7802P Port & LED Description Port & LED Description Port 1-24 24x Ethernet RJ45 (10/100/1000Mbps), used for connecting terminals. Port 1-16 16x Ethernet RJ45 (10/100/1000Mbps), used for connecting terminals. Note: GWN7803P Ethernet ports support PoE and PoE+.
- Page 4 LED Indicator Status Description Indicator Ground Terminal Power off Ground Cable Solid green Booting Flashing green Upgrade Ground bar Solid blue Normal use System Powering on the Switch Indicator Flashing blue Privisioning Connect the power cable and the switch first, then connect the power Solid red Upgrade failed cable to the power supply system of the equipment room.
- Page 5 2. After plugging the power cord into the power outlet, slide the Connect to SFP Port protector over the remaining strap until it slides over the end of the The installation process of the fiber module is as follows: power cord. 1.
-
Page 6: Connect To Console Port
Connect to Console Port Install on the Wall 1. Connect the RJ45 end of the console cable to the console port of 1. Use the matching screws (KM 3*6) to fix the two L-shaped rack- switch. mounting kits (rotated 90°) on both sides of switch. 2. - Page 7 3. Type the switch’s default management IP address http://192.168.0.254 in the browser, and enter username and password to login(The default administrator username is “admin” and the default random password can be found at the sticker on the GWN7800 switch) 3. Place the switch in a proper position in the rack and support it by the bracket.
- Page 8 CAN ICES-003 (A)/NMB-003(A) If trouble is experienced with this equipment, please contact (Agent in the US): Company Name: Grandstream Networks, Inc. Address: 126 Brookline Ave, 3rd Floor Boston, MA 02215, USA Tel: 1-617-5669300...