Advertisement
Connect to Console Port
1. Connect the RJ45 end of the console cable to the console port of switch.
2. Connect the other end of the console cable to the DB9 male connector or USB port to the PC.
Safety Compliances
The GWN780x(P) L2+ Managed Network Switch complies with FCC/CE and various safety standards. The GWN780x(P) power
adapter is compliant with the UL standard. Use the universal power adapter provided with the GWN780x(P) package only. The
manufacturer's warranty does not cover damages to the device caused by unsupported power adapters.
Warranty
If GWN780x(P) L2+ Managed Network Switch was purchased from a reseller, please contact the company where the device was
purchased for replacement, repair or refund. If the device was purchased directly from Grandstream, contact our Technical
Support Team for an RMA (Return Materials Authorization) number before the product is returned. Grandstream reserves the
right to remedy the warranty policy without prior notification.
GETTING STARTED
LED Indicators
The front panel of the GWN780x(P) has LED indicators for power and interface activities, the table below describes the LED
indicators' status.
LED Indicator
Status
Off
Solid green
Flashing green
System Indicator
Solid blue
Flashing blue
Solid red
Flashing red
Connect to Console Port
Description
Power off
Booting
Upgrade
Normal use
Provisioning
Upgrade failed
Factory reset
Advertisement
