Page 3
Ethernet ports’ LED indicators GWN7816P provides smart dynamic PoE output to power IP phones, IP cameras, Wi-Fi access points and other PoE endpoints. GWN7816(P) can be managed in a number of ways, including the local Web user interface of the Port SFP+ 49-54 6x 10Gbps SFP+ ports GWN7816(P) switch and CLI, the command-line interface.
Page 4
Notes: 3. After powered on, check the status of the • The GWN7816(P) uses a hot-swappable power supply unit to maintain the normal operation of the device. port indicator. If on, it means that the link is • The PSU for GWN7816 comes with iron wire to prevent tripping.
Page 5
3. Flip the switch over and place it smoothly on the table. used, this step could be skipped. 3. Type the switch’s management IP address http://<gwn7816(P)_IP> in the browser, and enter username and Install on a 19” Standard Rack (Only for GWN7816) password to login.
Page 6
UK Regulatory Information Hereby, [Grandstream Networks, Inc.] declares that the equipment type [GWN7816P/ GWN7816] is in compliance with UK SI 2016 No. 1091&2016 No. 1101. The full text of the UK declaration of conformity is available at the following internet address: www.grandstream.com...
Need help?
Do you have a question about the GWN7816 and is the answer not in the manual?
Questions and answers