Advertisement
If the VLAN is already created there is also the option to modify it by clicking on modify button
settings like Description, Tagged and Untagged ports and LAGs.
VLAN
The specified VLAN ID
Description
Enter a brief comment for the VLAN ID.
Select from the drop-down list:
● Remove All: remove all ports GE/LAG from this VLAN
Member Type
● Tagged All: Tag all ports GE/LAG to this VLAN
● Untagged All: Untag all ports GE/LAG from this VLAN
Select individually which ports are tagged, untagged or unselected.
Note:
GE
● Unselected ports will not be part of the VLAN
● Tagged ports expects tagged frames (Trunk port) like connecting a switch with another switch.
● Untagged ports expects non-tagged frames (Access port) like connecting a switch with end device.
LAG
Select individually which LAGs are tagged, untagged or unselected.
Please refer to this Table below for more details about Tagged and Untagged Ports.
Port Type
Untagged Packets
When untagged packets are
Untagged
received, the port will add the
Add a VLAN
Edit VLAN
Edit VLAN
Receiving Packets
Tagged Packets
If the VID of packet is allowed by
the port, the packet will be received.
for more options and
Forwarding Packets
Tagged Packets
The packet will be forwarded after
removing its VLAN tag
Advertisement
