I Good Practices After Each Cleaning Operation - Zodiac Vortex GV 33 Series Installation And User Manual

2.9 I Good practices after each cleaning operation

2.9.1 Clean the filter as soon as the appliance is out of the pool
• The cleaner's performance may be reduced if the filter is full or dirty.
• Clean the filter in clean water as soon as the appliance is removed form the pool after each
cleaning cycle. Do not wait for the debris to dry.
• After each cleaning cycle, follow the steps for cleaning the filter, voir § « 3.2 I Clean the filter as soon as the appliance
is out of the pool ».
2.9.2 Lay out the cable to reduce tangling
The appliance's behaviour is strongly impacted by the tangling of the cable. A cable that is correctly untangled will
guarantee better coverage of the pool.
• Untangle the cable and lay it out in the sun so that it returns to its original shape.
2.9.3 Storing the cleaner and cable
• Screw the protective cap back on if you unplug the control box power cord.
• Place the cleaner vertically at the location provided on the caddy for it to dry out quickly. Roll up the cable carefully
and place it on the caddy handle (see image
• Store all elements away from direct sunlight, humidity, and the elements, as well as any splashes. A protective cover
is available as an option (see image
).
).
EN
16