I Electricity Supply Connection - Zodiac Vortex GV 33 Series Installation And User Manual

2.3 I Electricity supply connection

In order to avoid any risk of electrocution, fire or serious injury, please follow the instructions
below:
• Use of an electrical extension is prohibited when connecting the control box.
• Make sure that the socket can be easily accessed at all times and is protected from rain or
splashes.
• The control box is splash-proof, but must not be immersed in the water or any other liquid.
It must not be installed in a floodable area; keep it at least 3.5 metres away from the edge of
the pool and avoid exposing it to direct sunlight.
• Place the control box near the socket.
• Unscrew the protective cap (see figure
• Connect the floating cable to the control box and lock it into place by turning it clockwise (to avoid damaging the
floating cable) (see image
• Make sure that the connector is fully pushed in so that no water can get in (see image
• Connect the power cord (see figure
maximum residual current device (if in doubt contact a qualified technician).
9
).
).
). Only connect the control box to a power outlet protected by a 30 mA
).