I The Remote Control (Depending On The Model) - Zodiac Vortex GV 33 Series Installation And User Manual

Electric cleaner
Hide thumbs Also See for Vortex GV 33 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

2.7 I The remote control (depending on the model)

• Respect the battery polarity.
• Do not recharge the battery, dismantle it or throw it onto a fire.
• Do not expose it to high temperatures or direct sunlight.
2.7.1 Switching the remote control on and off
• To switch on: press
.
• To switch off: press and hold
Tip: improve the remote control reception.
The frequency of the flashing of the led located on the remote control indicates the reception quality. If the
LED flashes quickly, reception quality is OK.
For the best communication between the control box and the remote control:
- Position the control box on the caddy.
- Turn the control box towards the pool
- Removal all large obstacles between the control box and the pool.
2.7.2 Piloting the cleaner
• The remote control is equipped with movement sensors to direct the cleaner:
2.7.3 Removing the cleaner from the water (depending on the model)
• Press
. The cleaner moves toward the wall and climbs up to the waterline.
2.7.4 Synchronising the remote control with the control box
By default, the remote control is already synchronised with the control box. If replacing the remote control/control box
or if a synchronisation problem occurs, follow the steps below:
• Place the remote control a maximum of 50 cm away from the control box.
• Connect the control box, check that the display shows the operating time, and that no cleaning cycle is running.
• Switch on the remote control by pressing
• Before the remote control switches to standby (around 45 seconds) press the
for 6 seconds.
• Check that synchronisation was successful by observing the display and the remote LED:
Display on the
control box
Good
0:45
2 seconds
FAIL
.
.
Remote LED
Flashing
• Synchronisation successful.
• Check that the distance between the control box and the remote
control is 50 cm maximum.
On steady
• Check the remote control batteries. Replace them if necessary. If
the problem is not resolved, contact your retailer.
: Forwards
: Backwards
: Left turn
: Right turn
: Stop
buttons simultaneously
and
Result
EN
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents