Advertisement
7
Function test
Each time the device is installed onto the rope, verify that it jams
in the desired direction.
8
Ascending the rope
8a. The device
must be loaded in a
direction parallel to
the rope. To avoid
slippage of the device
on rope, do not load
it at an angle with the
rope.
3
B18_BASIC_B185000K (051010)
8b. When traversing or passing a
rebelay, if you cannot avoid oblique
loads on the rope, secure the rope
with your lanyard connector or put
a connector in the upper connection
holes.
Advertisement
