Advertisement
7
Function test
Each time the device is installed onto the rope, verify that it jams
in the desired direction.
8
Ascending the rope
8a. The handle
must be pulled
correctly: downward
and parallel to the rope.
To avoid slippage of the
device on rope, do not
load it at an angle with
the rope.
3
B17S_ascension_B175010L (290212)
8b. When traversing or passing a
rebelay, if you cannot avoid oblique
loads on the rope, secure the rope
with your lanyard connector or put
a connector in the upper connection
holes.
Advertisement
