Table of Contents
Advertisement
Available languages
Available languages
Other symbols on the cutting disc:
Do not use defective discs.
Symbols used in the
instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Precaution symbol (explanation of
precaution instead of exclamation
mark)withinformationonpreven-
tion of harm / damage.
Wear ear protection
Switch the device off and remove
the mains plug. Allow the device to
cool down.
Connect the machine to the power
supply.
W earcut-resistantgloves.
General Safety Directions for
Power Tools
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
cancauseelectricalshock,fire
and/or severe injuries.
Retain all safety directions and in-
structions for future use.
Theterm„powertool"inthewarnings
referstoyourmains-operated(corded)
powertoolorbattery-operated(cordless)
powertool).
1) Work area safety :
a) Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) Electrical safety :
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
fiedplugsandmatchingoutletswill
reduce risk of electric shock
b) Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and re-
frigerators. There is an increased risk
of electric shock if your body is earthed
or grounded.
c) Do not expose power tools to
rain or wet conditions. Water
entering a power tool will increase the
risk of electric shock.
GB
25
Advertisement
Chapters
Table of Contents
