Table of Contents
Advertisement
Here, users can also use the AT+AIRKISS command to implement the AIRKISS method of configuration.
3.1.5 Web Configuration
The E103-W02 can be reconfigured by using the web page, before this operation, the module should be connected to the
PC for wireless network.
After the PC shows successful connection, open the browser and input the IP address of the module (if you don't know
the IP address of the module, you can use the serial AT command "AT+APIP=? ).
Then enter the module parameters configuration page, where several parameters of the module can be reset.
Advertisement
Table of Contents
