Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide. Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free.
1Introduction 1.1 Brief Introduction E103-W11 is a cost-effective serial to Wi-Fi module, small size package, working in the 2.4~2.4835GHz frequency band. The module can use the serial port to send and receive data, which reduces the threshold for wireless applications.
Chengdu Ebyte Electronic Technology Co.,Ltd. E103-W11 User Manual 2Specification and parameter. 2.1 RF Parameters RF parameters Value Remark Working frequency Support ISM band 2400MHz~2480MHz transmit power The software is adjustable, available for user self- 19.5dBm~20.5dBm development and configuration Receive sensitivity...
GPIO_NUM_3, it can be used as general GPIO by SYIO series instructions MOSI Modulation serial port of E103-W11, LOG_TX, connecting to RX of external TTL Modulation serial port of E103-W11, LOG_RX, connecting to TX of external TTL GPIO_NUM_0, it can be used as general GPIO by SYIO series instructions...
E103-W11 User Manual 6Quick Start E103-W11 is featured with easy usability. In order that users can quickly familiarize, this section will guide users to configure and communicate with this module in various modes through simple setting. All AT commands are used in the test process. To facilitate users’ quick connection, we have developed quick configuration software for users.
Chengdu Ebyte Electronic Technology Co.,Ltd. E103-W11 User Manual Fig.1 Schematic of module communication mode 6.2 Use BLE for network configuration Below preparations are needed • Ensure the module is in STA mode • Serial Port Assistant Xcom and BLE configuration APP are needed •...
Serial Remark E103-W11 supports AP mode as a physical connection role (equivalent to a router). In STATION mode (it is equivalent to a Wi-Fi device), access of up to 8 Wi-Fi devices in AP mode is supported. E103-W11 includes TCP Server, TCP Client and UDP as Socket role. In TCP Server mode as Socket role. Connection to 5 Sockets is supported.