Table of Contents
Advertisement
⑧. Turn on your phone wifi and connect to a hotspot.
⑨. Install and open the mobile APP software "Wi-Fi Starter", enter the WiFi hotspot password, and click "Start".
(Network Name is the name of the WiFI hotspot that the phone is connected to, the software will automatically
recognize it, no need to input)
⑩. If the WiFi module is far away from the module, please connect the antenna. The LED1 light on the base board is lit
(GPIO9 pulled low), which indicates a successful connection to the WiFi hotspot, otherwise, please retry the above steps.
(After successful connection, the module will remember the WiFi hotspot (including password) connected this time, and
will connect automatically next time when you reset or reboot the module)
Advertisement
Table of Contents
